Launch Rails

Direct shipping from 80/20

X-Rockets has an exclusive partnership with 80/20 who has our designs and parts list on file for each Rail Kit.  When you order from X-Rockets, the kits are cut, machined, and sent directly to you!  X-Rockets stocks the stainless steel pipe & rods that are shipped out with your order.  Our prices do not include the UPS costs.

1.5" Rail Kit            $175

Universal Adapter    $135

1.0" Rail Kit            $ 63

1.0" Rail 4' Extension $55

Clikc on thumbnails below to inspect our quality build.

 

1.5" Rail Kit
Universal Adapter
1.0" Rail Kit
1.0" Rail 4' Extension Kit
1.5" 2-Piece Rail, 10" long
 

1.5" Rail Kit
X-Rockets offers a variety of rail hardware compatible with 5/8" O.D. rail buttons.

The 1.5" Rail Kit consists of the following:

(2) 5'-0" sections of aluminum extrusion, 1.5" square "Lite" profile.

(1) Custom connecting plate kit and hdwr, stainless cap screws, and t-nuts.

(1) "Rocket Stop" offset angle bracket with stainless steel cap screw, t-nut.

(1) 0.75" diameter stainless pipe, 24" long, with (4)mounting holes for cap screws.

(1) 1/4" allen key for assembly and adjustment of Rocket Stop on rail.

Click Here for rail catalog page

 

1.0" Rail Kit
X-Rockets offers a variety of rail hardware compatible with 5/16" O.D. rail buttons.

The 1.0" rail kit consists of the following:

(1) 6'-0" long piece of aluminum extrusion, 1.0" (25.4mm) square profile.

(1) "Rocket Stop" offset angle bracket with stainless steel cap screw, and t-nut.

(1) 0.5" diameter stainless rod, 18.0" long, with (3) mounting holes for cap screws.

(1) 3/16" allen key for assembly and adjustment of Rocket Stop on rail.

Also available: 4'-0" extension rail and connector plate kit for a 10'-0" overall length.
(10'-0" extended rail must be mounted to structural backing member to control flex)

Click here for rail catalog page

1.0" Rail Kit, 6' long
Universal Adapter
 

Universal Adapter
The X-Rockets Universal Adapter gives ultimate flexability in rod/rail configurations to any existing pad.

A 0.75" diameter stainless steel mounting pipe extends 10.0" to mount into your pad.

All t-nuts and stainless steel cap screws are provided as shown.

Rail change-out is accomplished by loosening the cap screws, and sliding the rail out. The adapter also accepts up to 0.5" diameter launch rods at the top bore. This feature accomodates other rail systems that have their own mounting rod.

The Universal Adapter has a machined keyway and tap holes at the base to accept the X-Rockets Base Rail of the 1.5" Drop-down Launcher.

Once mounted in your pad with the Base Rail attached, launch rails and/or rods can be switched out without any removal of the Drop-down Launcher.

Click here for Adapter catalog page

 

Rod Adapter
The X-Rockets Rod Adapter is a cost effective method of adapting a launch rod for use with the 1.5" Drop-down Launcher.

A 0.75" diameter stainless steel mounting pipe extends 10.0" to mount into your pad.

Rod change-out is accomplished by loosening the stainless steel cap screws, which also hold in the mounting pipe.

The adapter accepts up to 0.5" diameter launch rods at the top bore. This feature accomodates other rail systems that have their own mounting rod.

The Rod Adapter has a machined keyway and tap holes at the base to accept the X-Rockets Base Rail of the 1.5" Drop-down Launcher.

Once mounted in your pad with the Base Rail attached, launch rails and/or rods can be switched out without any removal of the Drop-down Launcher.

Click here for Adapter catalog page

Rod Adapter
Adapter Base fits 1.5" Rail or Adapter

Base Extension

Additional Base Rails are available for $35.  You can mount it to a 2nd rail, or one of the Adapters.  CLICK HERE for 2003 Catalog.